This project has been a long time in the works. A year ago, before I even considered moving to the burbs, I literally picked up these legs out of the trash at a garage sale. (I did ask first.) They once were legs for a side table and were solid wood.
I did not have a plan for them but they were too nice to be trashed.
When we moved into our new house I knew I would want a bench at the end of our bed. The room is big and I love having a place to sit and put on shoes in the bedroom. I stalled on completing this project because I am trying to keep the cost down in decorating our room. I am way over budget in the den and guest room. (Like double my $100.00 per room budget in both rooms.) Before starting the bench I had spent about $80.00 on the master bedroom and I still have a few things to do. The holdup was upholstery foam. It is expensive. Crazy expensive. The foam for the mudroom bench tufted cushion was $32.00. A friend of my daughter told me she bought foam on Amazon, but it was still going to be $20.00 with shipping.
A trip to Ikea solved the problem. Have you ever been in the “As is” section of an Ikea? It is a great place to find what you didn’t even know you were looking for. Table legs, cabinet doors, scratch and dent furnishings, hardware…the place is fun to look around in for the unexpected. I found a huge cushion for a couch or chair marked $5.00. Plenty big enough for my bench.
I sliced the thickness of the foam in half using an electric knife then used spray adhesive to attach it to a scrap of plywood pulled from the hoard and cut to fit, added a layer of batting then wrapped an old sheet around the foam and attached it to the plywood with my staple gun. This step keeps the foam in place and smooth while the upholstery is being attached. It has been so long on this project that I could not find a photo of the cushion or the big slice job. I will keep looking.
In order above: sheet on bottom, then a layer of batting, then foam, then plywood
Hubby built a frame for the bench base and attached the legs with thumb screws. The frame and legs got painted a couple coats of Behr Revival Mahogany.
This is a cool tool. It holds the wood at a 90 degree angle so you can attach the parts.
Here it was while we were fitting the bench top on the base. It looks like we did not have it on evenly.
The upholstery brings a little color into the room. it was $15.00 for two yards. Well it looks like I am going to go over on this room also, but not by much. The bench ended up costing $22.00. Not bad.
I love how this looks.
I really want to paint the wall behind our bed a darker color. I believe it is going to be Garden Wall by Behr.
Here she is in all her beauty. Hubby wanted some color in the room. I think this fills the bill.
Leave a Reply