We had a beautiful Saturday to work on turning headboards and footboards into benches. It was my plan to get all five of the benches made as far as possible. We were up and at em’ early so that meant it was a chilly start. We heated the garage and laid out all four beds. You would have laughed as we carefully checked each bed to come up with an attack plan. It sort of felt like we were strategizing for a big game.
All the headboards lined up in the Garagemahal.
I call this one the curvy bench. Each section of the headboard curves slightly. It is a very comfortable bench.
The headboard is really plain but the footboard has a sort of ornate bottom. I am guessing this set was from the 50’s or 60’s. I snagged it for four dollars recently and decided this set would be for my front porch.
We have had this monster for over a year, hanging out in the Garagemahal. We found it for $25.00 online. It is big, tall, heavy and is going to make a beautiful bench.
The footboard is just as heavy as the headboard. The posts are four inches square.
This one is for a friend, Shahana.
It looked like the hardest of all of them was going to be the curvy vintage bed so of course that was where we started. Why? Well … we don’t do easy at our house. The bed headboard curves at the back and has a center support that does not extend to the floor and there was an ornate bottom panel on the footboard only. We knew it would be a problem piece but we dove in.
We decided to make the seat fit around the legs. I knew I wanted the front to look something like the ornate bottom of the footboard that are now the sides of the bench. In my hoard I had a French provincial footboard that I bought for $ 2.00 at a thrift store. After cutting off the legs and cutting it down to size it got attached to the front. It does not match exactly but I think it works.
Here it is with the plywood seat.
The next one we attacked was one I am making for a friend, at her request. I can already see this one finished in my head. Dark red with a slatted seat that is stained. I want it distressed and glazed. I ran out of 1 X 4 slats or this one would be done. It did not fight with us.
Everything lined up pretty easily.
The slats are going to be evenly spaced once we get them all cut. This is an old solid maple frame. It is heavy and has beautifully turned wood posts.
This is all we have left. boo.
After watching HGTV Saturday morning I totally knew what I wanted this beauty to be. It is going to be a storage bench seat painted my sea salt paint with dark gray glaze and a pretty heavy distressing. We got the headboard cut down 6 inches in height and the footboard cut into arms. I need to get plywood, make a raised panel, and piano hinge.
The final bench we got underway is for Shahana. It is going to be turquoise. I will bet it ends up with a red seat and leopard pillows because that is how she rolls.
We got this far on Shahana’s bench. Next weekend we will get the plywood on the top.
The twin bed you saw in the first photo did not get started. Hubby and I could not figure out how to fix the problems it had so we are thinking on this one.
One bench ready for sanding, wood filler, primer and paint. Two benches ready for seats then sanding, wood filler, primer and paint. One bench will take construction of a box with a hinged top then sanding, wood filler, primer and paint.
All in all it was not a bad weekend’s work.
Have a wonderful week.
Karen
Leave a Reply