Adding a Corrugated Tin Wall

We got a good start on the want to finish projects before putting our beloved Star Hill on the market over the holiday break.

This is what the wall in our main room has looked like since we moved in.

1-IMG_9575 1-IMG_9574 sheetrock wall near stovepipe

We recently got a new-ish wood burning stove off Craig’s List for our near the lake house, Star Hill. ($200 for a stove used one season. It is still for sale at Tractor Supply for over $600. That was a score.) It has a glass door and an electric blower, the two things that the old stove in the house did not have. We can now heat the whole house with it when we want and get to see the flames. We are already enjoying it. We knew that we would want a metal wall behind the stove and had planned for it to be put in for the seven years we have owned the place. Stuff always gets in the way of projects. Stuff like rescuing roadside furniture.

A cold, wet, weekend after Christmas was the perfect time to knock this particular project out. Hubby figured out how much tin to buy. It comes to about fifty cents a square foot. You can buy it in up to 12 foot lengths.

/home/wpcom/public_html/wp-content/blogs.dir/f86/43894410/files/2015/01/img_2014-0.jpg

/home/wpcom/public_html/wp-content/blogs.dir/f86/43894410/files/2015/01/img_2013-0.jpg

How nice of Home Depot to provide gloves.

First we cleared the wall and found the studs. I love projects where we will cover the wall because we get to write directly on the wall.

1-IMG_9579

Next, attach this wooden support stuff to the studs.

/home/wpcom/public_html/wp-content/blogs.dir/f86/43894410/files/2015/01/img_2012-0.jpg

The tricky part here was making sure curves lined up vertically. Hubby chopped off the ends to make sure they all started out the same way then made sure they lined up with each other at the start of the wall. Our roofing nailer attached the wood to the wall.

1-IMG_9581 1-IMG_9601

Our wall slopes up so that adds a level of difficulty to the project that we wouldn’t have had to deal with on a plain flat ceiling.

Using the very scary grinder, Hubby (AKA Mr. Math) cut the angles on the tin along with the vent cover and electrical outlet using rise over run math.

1-IMG_9588

If you plan on doing this project you will need these special screws, gloves (or a box of Band Aids- that tin is sharp), something to cut the tin (if a grinder is too scary for you too, they make a metal cutting blade for a jigsaw) a level, a stud finder, tin, and wooden corrugated strips.
1-IMG_9584

1-IMG_9583

Plan on this project taking a whole day. Cutting around vents and outlets slows the process. Full disclosure here; it took us two days and a trip to three hardware stores. If we planned better and didn’t have to drive all over creation looking for supplies we forgot to bring, we could have finished in one day.

We decided to use some of our natural edge cedar for a shelf on the wall. The brackets were garage sale finds that we used for years with a funky swirl on the bottom. The grinder took care of the swirl. I love the industrial, rustic feel that the wall gives the cabin.

1-IMG_9622 1-IMG_9620 1-IMG_9619 1-IMG_9618 1-IMG_9617 1-IMG_9616 1-IMG_9615 1-IMG_9614 1-IMG_9613 1-IMG_9612 1-IMG_9591

The wall looks great. It is exactly what I hoped. We have it set up with our free or almost free furniture, but I also wanted you to see it with more modern furniture and fabric.  It would be a great wall for a modern wall.   I really like the look.

1-IMG_9625 1-IMG_9623

Thank you for taking the time to read my blog. I hope it inspires you to tackle your own projects.

23 responses to “Adding a Corrugated Tin Wall”

  1. Love how it looks. Mike wants us to do the entire down stairs in Colorado cabin. Like this I think the hole thing would be to much I like it as a accent wall. Great kob cousin

    Like

  2. Hello.
    How did you attach the shelf brackets without smashing the corrugated metal? Also those wood wavy pieces-does Home Depot sell those? Thanks!!
    Luv it. Doing a similar project in kitchen behind the stove and some open shelving. It’s the brackets that had us confused
    Take care.

    Like

    • We attached the shelving on the stick out part of the wave and planned ahead so that the wood wavy stuff was where we needed to hang the shelf. I️t took some planning. Yes, Home Depot sells the wavy wood. Good luck and send pictures!

      Like

  3. Where, oh where did you find the corrugated furring strips? Perhaps my internet skills are failing in my old age, but can’t find them anywhere. Help out a weekdat country boy, please

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: