We got a good start on the want to finish projects before putting our beloved Star Hill on the market over the holiday break.
This is what the wall in our main room has looked like since we moved in.
We recently got a new-ish wood burning stove off Craig’s List for our near the lake house, Star Hill. ($200 for a stove used one season. It is still for sale at Tractor Supply for over $600. That was a score.) It has a glass door and an electric blower, the two things that the old stove in the house did not have. We can now heat the whole house with it when we want and get to see the flames. We are already enjoying it. We knew that we would want a metal wall behind the stove and had planned for it to be put in for the seven years we have owned the place. Stuff always gets in the way of projects. Stuff like rescuing roadside furniture.
A cold, wet, weekend after Christmas was the perfect time to knock this particular project out. Hubby figured out how much tin to buy. It comes to about fifty cents a square foot. You can buy it in up to 12 foot lengths.
How nice of Home Depot to provide gloves.
First we cleared the wall and found the studs. I love projects where we will cover the wall because we get to write directly on the wall.
Next, attach this wooden support stuff to the studs.
The tricky part here was making sure curves lined up vertically. Hubby chopped off the ends to make sure they all started out the same way then made sure they lined up with each other at the start of the wall. Our roofing nailer attached the wood to the wall.
Our wall slopes up so that adds a level of difficulty to the project that we wouldn’t have had to deal with on a plain flat ceiling.
Using the very scary grinder, Hubby (AKA Mr. Math) cut the angles on the tin along with the vent cover and electrical outlet using rise over run math.
If you plan on doing this project you will need these special screws, gloves (or a box of Band Aids- that tin is sharp), something to cut the tin (if a grinder is too scary for you too, they make a metal cutting blade for a jigsaw) a level, a stud finder, tin, and wooden corrugated strips.
Plan on this project taking a whole day. Cutting around vents and outlets slows the process. Full disclosure here; it took us two days and a trip to three hardware stores. If we planned better and didn’t have to drive all over creation looking for supplies we forgot to bring, we could have finished in one day.
We decided to use some of our natural edge cedar for a shelf on the wall. The brackets were garage sale finds that we used for years with a funky swirl on the bottom. The grinder took care of the swirl. I love the industrial, rustic feel that the wall gives the cabin.
The wall looks great. It is exactly what I hoped. We have it set up with our free or almost free furniture, but I also wanted you to see it with more modern furniture and fabric. It would be a great wall for a modern wall. I really like the look.
Thank you for taking the time to read my blog. I hope it inspires you to tackle your own projects.
Leave a Reply