I love the look of reclaimed wood and I have been smitten with reclaimed wood signs for a while. This week it was my turn to do the craft project for our ladies craft night so of course I planned a reclaimed wood sign project. We picked up a ton of cedar fence pickets off the side of the road a while back and have been putting them to good use. We have used them to cover my office wall, our bedroom wall at the lake, and I covered the top and drawers of a dresser with the wood.
This week we cut the wood to length for 8 signs and I glued and nailed two thin strips of scrap to the back of each set in order to make a canvas for our signs.
I used the vinyl cutter to cut out some sayings, brought a set of stencils, paints, painter’s tape, brushes, sanding block, sander, and anything else I thought we might use.
Each lady chose a canvas and set off on their project.
First, several of us whitewashed our boards.
The steps are easy. Remove the letters from the vinyl and keep the part that you removed the letters from. Lay the vinyl on the wood, make sure to press it all down really well.
Lightly apply paint to the spaces.
Allow the paint to set for a little bit the gently peel off the vinyl. You will end up with a picture or saying.
One of our friends decided to paint a picture on her canvas. Wow!
It was a fun, rainy night. You will see my “Kiss me” picture in our new place. It still needs some work to be done,
It was a fun night.