We bought a stainless steel tool bench table top that was dented because it was dropped in shipping for $45.00 a year ago. The top is a stainless steel sheet covering workbench hardboard and weighs 83 lbs.
I didn’t know exactly what we were going to do with the tool bench top but I convinced Mr. Math that we needed it, even if only just for the shop and it was a great deal. Now that we have the deck, I wanted a serving table/ work space sort of what they made at Always Chasing Life . I liked the casters so that we could move around where we needed it. Now that we can move from the the front porch to the back porch all on the same level it will be easy to set up as we need when we once again have groups over to the house. Since our serving table will be outside all the time it needed to be made from treated lumber or painted with outdoor paint or with rot resistant wood. This one has a bit of all that.
We are still working on a budget to get the deck done and I am still trying to get the clutter cleaned up in our storage so I tried hard to not buy anything more than absolutely necessary for this project. I knew we had some 4×4 posts for the legs a friend gave us a while back when they repacked their porch posts. I also remembered that we have scraps of cedar boards around that need to be used up. We just had to purchase 4 2X4 boards and 2 1X4 boards along with casters for the legs to help the 7 foot beast move around easily in order to put this together. I collected the scrap cedar and posts then Mr. Math bought the wood and casters.
Assembly of the Base 
Table Frame
Mr. Math assembled the frame and I stained and painted it with materials on hand.
I knew I wanted the shelf on bottom to be able to hold things when needed but not hold water when it rains so we spaced the boards four inches apart. We cut the boards for the shelf to width, planed, and sanded most of the old paint and stain off the boards-but not all because I like letting it show through , then sealed the cedar boards with a clear outdoor sealer and finally nailed them to the bottom 2X4’s for additional storage when using it as a serving table. We did leave the center board a little wider to make the spacing work.
L brackets attached the top to the base.
The table is far from perfect just like everything back there and Mr. Math still needs to work on the dents on the top a little more but it looks good and will be useful. It won’t rust or rot outdoors, will be a good work station and food serving space, and will store right next to the house.
Altogether we spent about $60.00 on a seven foot long counter height stainless workspace that is far from perfect but I am thrilled to have it. I can’t wait to get everything totally put together and for us to be able to have a blow-out party once the coast is clear on the Covid front.
I hope you are staying safe, and finding reasons to be thankful in this season.
We love hearing from you.
Blessings,
Karen
Leave a Reply